Accessories (cables, connectors, fastening materials, etc.)

Betteri end cap for the waterproof closure of inverters Maybe they've already noticed. The inverters have connection plugs for solar modules, but also an additional input cable. This connection allows a large number of inverters to be connected in series. If you do not want to connect in series, you should close the contact with the end cap to protect against water penetration. This is where the end cap comes into play. For all common inverter models Envertech Hoymiles Revolt Tsun

Read more less

Betteri connector adapter female BC01 Betteri socket for Envertech and Hoymiles The BC01 socket is used to connect an inverter. For cable extension with waterproof plug connection of the Betteri plug outdoors or indoors. The Betterie female socket is plugged into the output plug of the inverter. The three-pole connection is made via screw contacts. The poles are clearly labeled to avoid confusion. For all common inverter models Envertech Hoymiles Revolt Tsun Scope of delivery: 1 female connector Betteri Click here for the Betteri male plug & end cap

Read more less

Description: Hammer head screw for fastening support triangles. The hammer head screws connect the mounting system to the profile rails. The hammer head rotates in the channel of the mounting rail and locks the profile. The thread of the screw looks out of the profile. The nut locks with locking teeth to prevent the screw from loosening. Hammer head suitable for profile 28/15 Scope of delivery: 1 hammer head screw M10 25mm 1 nut with locking teeth M10

Read more less

3-wire connection cable for microinverters for connecting the microinverter and the house line. The ending is always delivered open. This means that the cable can be routed flexibly and the desired end can also be mounted with, for example, the Schuko plug, Wieland plug or the permanent connection. The cables have the following properties for outdoor laying and long-term exposure to weather and temperature Protection from water Protection from light Protection from cold/heat Can be laid underground You need one cable for each inverter. The connection cables with battery plugs are suitable for inverters from Hoymiles and Envertech and other manufacturers. We supply the AP Systems extension cables with original Wieland plug connections for connection to the AP Systems inverters. The 1m connection cable from AP-Systems is part of the offer. Scope of delivery: Cable in the desired length (5m, 10m, 20m), ready crimped One side with mounted battery or Wieland plug, other side open for AP-Systems cable 1m AP-Systems connection cable with Wieland plug Complementary products: Schuko plug Inverter Open questions? Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the topic of balcony power plants

Read more less

Socket part RST20i3, 3-pole for safe installation. Socket part in screw technology, 250V/20A, for cable diameter 6-10 mm, coding color black, housing color black. IP66/68 Scope of delivery: Insert socket part Housing 99.449.6046.6 96.031.4053.1

Read more less

M8 cylinder head screw with hexagon socket for mounting inverters. The screw enables the inverter to be firmly installed directly in the channel of the profile rail. The inverter is installed protected under the modules. The screw is delivered including the lock washer and the slanted nut (hammer head threaded nut). Scope of delivery: 1 cylinder head screw M8 16mm or 20mm 1 lock washer 1 rhombus nut

Read more less

Roof hook for solar mounting tile roof The triple flexible PV roof hook adapts ideally to the conditions of your tiled roof. Regardless of whether there is single or double battens under the pans, whether the rafters and pans are not evenly distributed or whether the distance between solar modules and roof tiles should be flexibly aligned. With a three-way adjustable roof hook, you retain the choice for your solar installation. The flexibility of steel roof hooks guarantee decades of dynamic balancing of loads caused by wind, snow and weather. Due to the flexible installation, our roof hooks are particularly suitable for mounting a balcony power plant on the roof or for mounting several solar modules on the tiled roof. Roof hooks are screwed to the roof rafters with washer head screws. A hammerhead screw connects the roof hook to the profile rail, onto which the solar modules are attached. scope of delivery 1 x roof hook, 3-way adjustable in height and width Complementary products Mounting profile Hammer head screw End clamp & middle clamps Profile connector End cap Here you will find our complete tile roof installation set for one or two solar modules with all components for solar installation. Click here for the installation instructions for attaching to the pitched roof with roof tiles

Read more less

Wieland RST20i3 distribution block 3-pole, application 250V with PE, 20A, for coupling up to three inverters at 3 inputs and 1 output to the house line, with mounting option, coding color black, housing color black In the following article you will find information on connecting several balcony power plants and using the Wieland distribution block Scope of delivery: distribution block Closing cap for inputs that may not be required Possible setup: 2 Wieland plugs (inputs from the inverter to the distribution block) distribution block 1 Wieland socket part (output to house line) Complementary products: Wieland device connection Wieland angle plug Wieland power socket Wieland socket part Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants 96.030.0153.1 Z5.564.4553.1

Read more less

Description: The mounting plate connects profile rails to the support triangle flat roof system. Four mounting plates are required for each support triangle. The grooved back connects firmly to the nut and locks the screw in the profile rail channel. Scope of delivery: Mounting plate M10 hammer head screw M10 nut with locking teeth

Read more less

Mounting triangle elevation 20° - 40° made of solid aluminum. The inclination of the modules can be flexibly adjusted. In order to always achieve the highest power yield, the angle of inclination is adjusted to an ideal 32° in summer and to a maximum inclination of 40° in winter. The individual mounting triangle is only used to supplement a complete set of flat roof mountings. Further parts for the finished assembly stand are - Profile rails - Mounting plate including hammer head screw - End clamps & middle clamps Assembly: Two support triangles are required to attach a module. Three support triangles are required to attach two modules in a row. View our assembly instructions here. To ensure safe installation, the assembly must be weighed down or firmly anchored. The support triangles can be weighted down with stone slabs or curbs without drilling. Scope of delivery: 1 x elevation triangle Complementary products: Complete set for flat roof mounting profile rail Mounting plate End clamps Middle clamps Slide-in connector End cap Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants

Read more less

Schuko plug IP54 made of solid rubber for quick and safe installation - complete protection against contact - Protection against splashing water

Read more less

Original MC4 plug or socket including metal inlay for producing solar cables 4mm² - 6mm² Solar modules are connected with solar cables. These in turn are connected using MC4 connectors with clear advantages. Firm connection of solar module cable and extension Protection against water, light, cold & heat Contact protection Usually the metal inlays are crimped with the cable to create a firm connection. Alternatively, the metal piece can also be soldered. The polarity would also be important, as this is assigned exactly the opposite way with MC4 plugs than at first glance. The square plastic plug is the male plug. The plug with a pin in the middle is the female plug. The cause here is the metal parts and you can see that the metal part of the pin plug is larger than the metal part of the square plastic plug. Packaging Unit: 1 piece

Read more less